Selasa, 03 April 2012
Ford Mustang Saleen S281
December 31st, 1969 Under new ownership the company formerly known as Saleen Inc, is now Saleen Performance Vehicles and they just revealed photos ahead of the SEMA debut for their bread and butter model the 2010 Saleen S281. This will be the fifteenth year for the s281 model since it’s introduction in 1996 and it’s probably the most important unveiling this company will have as it’s no longer run by the man who started it. This vehicle debut will set the tone and image for the company moving forward. From the photos released I think the exterior of the S281 looks amazing. They have truly taken the 2010 Mustang design to the next level with the redesign of the front and rear fascias, rear wing, hood and side louvers. The wheels look next generation as does the rear exhaust. Check out the photos and give us your feedback in the comments whether positive or negative.
Senin, 02 April 2012
Porsche
New Porsche supercar concept is directly designed from the designer’s imagination CGI, Emil Baddal. A few months ago, the Iranian artist published an array of design proposals for several sports cars including a BMW, a Ferrari (probably his best work up until now) and a Lamborghini. Baddal did not name the concept nor did he give out any details about the idea behind the creation of the Porsche project car which appears to be what we’d describe as a freestyle design exercise.
BMW Concept
The BMW CS Concept was a concept car displayed by BMW in 2007 at several international motor shows and again in April 2008 at the New York International Auto Show. It is a fastback sedan that features many new innovations for BMW, such as door handles that only come out when sensors detect motion.
It has dimensions slightly bigger than the E65 7-series
It has dimensions slightly bigger than the E65 7-series
Tom Purves, CEO of BMW America, stated that CS Concept could be produced, following positive initial comments in 2007 by BMW dealers. This was followed up in 2008 by an announcement by BMW that the concept goes into production in the form of the BMW Gran Turismo. BMW later cancelled in November 2008 because of financial reasons.
On May 29, 2009, BMW unveiled its 5-series Gran Turismo sportback.Mazda furai
We won't spend too much time on the Mazda Furai concept. You see, it's a concept for a Le Mans series racecar; that sport has a very niche following in the U.S. What's cool about the Furai is that it's a wild-looking racecar that was designed to actually race.
- Looks like: Mazda looked at the aquatic world for inspiration
- Defining characteristics: Swooshing body panels
- Ridiculous features: A radical departure from racecar looks
- Chance of being mass-produced: It's a racecar that might
- show up at major events soon
This concept can navigate a track at racing speeds, and the design is even functional for aerodynamics. The engine is a rotary one, like the one in the RX-8.
Camaro
The Chevrolet Camaro is an automobile manufactured by General Motors under the Chevrolet brand, classified as a pony carand some versions also as a muscle car. It went on sale on September 29, 1966, for the 1967 model year and was designed as a competing model to the Ford Mustang. The car shared its platform and major components with the Pontiac Firebird, also introduced for 1967.
Four distinct generations of the Camaro were developed before production ended in 2002. The nameplate was revived again on a concept car that evolved into the fifth-generation Camaro; production started on March 16, 2009.
Jensen Interceptor
The Jensen Interceptor was a sporting GT-class car hand-built in the United Kingdom by Jensen Motors between 1966 and 1976. The Interceptor name had been used previously by Jensen for an earlier car made between 1950 and 1957. The car broke with Jensen tradition by having a steel bodyshell instead of glass-reinforced plastic and by having the body designed by an outside firm, Carrozzeria Touring of Italy, rather than the in-house staff. The early bodies were Italian-built, by Vignale, before production by Jensen themselves began – with subtle body modifications – in West
maserati MC12
The Maserati MC12 is a two-seater sports car produced by Italian car maker Maserati to allow a racing variant to compete in the FIA GT Championship. The car entered production in 2004 with 30 cars produced (five of which were not for sale). A further 25 were produced in 2005 making a total of 50 cars available for customers, each of which were pre-sold for €600 000.
Maserati designed and built the car on the chassis of the Enzo Ferrari but the final car has much larger size and a lower drag coefficient.[7] The MC12 is longer, wider and taller and has a sharper nose and smoother curves than the Enzo Ferrari, which has faster acceleration, better braking performance (shorter braking distance) and a higher top speed. The top speed of the Maserati MC12 is 330 kilometres per hour (205 mph) whereas the top speed of the Enzo Ferrari is 350 kilometres per hour (217.5 mph).
The MC12 was developed to signal Maserati's return to racing after 37 years. The road version was produced to homologate the race version. One requirement for participation in the FIA GT is the production of at least 25 road cars. Three GT1 race cars were entered into the FIA GT with great success. Maserati began racing the MC12 in the FIA GT toward the end of the 2004 season, winning the race held at the Zhuhai International Circuit. The racing MC12s were entered into the American Le Mans Series races in 2005 but exceeded the size restrictions and consequently paid weight penalties due to excess range
MARUSSIA
The Marussia B1 and B2 models are based on the same semi-monocoque chassis with a steel spaceframe covered by carbon fiber panels - differing only in body shape.Both Marussia sports models are mid-engined, with the engine mounted transversally on the back axle. The English company Cosworth supplies Marussia with two different V6 engines. One is a naturally aspirated 3.5 liter producing 300 horsepower and the other is a 2.8 liter turbo-charged engine offered in 360 or 420 horsepower variants. The 420 horsepower engine allows Marussia cars to reach a claimed top speed of 250 km/h and acceleration from 0 to 100 km/h in 3.8 seconds.
ferrari dino
Dino was a brand for mid-engined, rear-drive sports cars produced by Ferrari from 1968 to 1976. The Dino brand was meant to be used for cars with engines that had fewer than 12 cylinders, reserving the Ferrari name for the V-12 and flat 12 models. The Dino name was retired after that point, in favour of conventional Ferrari branding. The Dino brand was an attempt by Ferrari to produce a relatively low-cost sports car.
The Dino models used Ferrari racing naming designation of displacement and cylinder count with two digits for the size of the engine in deciliters and the third digit to represent the number of cylinders, i.e., 246 being a 2.4-litre 6-cylinder and 308 being a 3.0-litre 8-cylinder. Ferrari street models of the time used a three-digit representation of the displacement in cubic centimeters of one of the 12 cylinders, which would have been meaningless in a brand with differing numbers of cylinders.
The Dino 246 was the first Ferrari model produced in high numbers. It is lauded by many for its intrinsic driving qualities and groundbreaking design. In 2004, Sports Car International placed the car at number six on its list of Top Sports Cars of the 1970s. Motor Trend Classic placed the 206/246 at number seven in their list of the 10 "Greatest Ferraris of all time".
The Dino models used Ferrari racing naming designation of displacement and cylinder count with two digits for the size of the engine in deciliters and the third digit to represent the number of cylinders, i.e., 246 being a 2.4-litre 6-cylinder and 308 being a 3.0-litre 8-cylinder. Ferrari street models of the time used a three-digit representation of the displacement in cubic centimeters of one of the 12 cylinders, which would have been meaningless in a brand with differing numbers of cylinders.
The Dino 246 was the first Ferrari model produced in high numbers. It is lauded by many for its intrinsic driving qualities and groundbreaking design. In 2004, Sports Car International placed the car at number six on its list of Top Sports Cars of the 1970s. Motor Trend Classic placed the 206/246 at number seven in their list of the 10 "Greatest Ferraris of all time".
Ferrari
The Enzo Ferrari is a 12 cylinder mid-engine berlinetta named after the company's founder, Enzo Ferrari. It was built in 2002 using Formula One technology, such as a carbon-fibre body, F1-style electrohydraulic shift transmission, and Carbon fibre-reinforced Silicon Carbide (C/SiC) ceramic composite disc brakes. Also used are technologies not allowed in F1 such as active aerodynamics and traction control. After a downforce of 775 kg (1,709 lb) is reached at 300 km/h (186 mph) the rear wing is actuated by computer to maintain that downforce.
The Enzo's V12 engine is the first of a new generation for Ferrari. It is based on the architecture of the V8 found in sister-company Maserati's Quattroporte, using the same basic architecture and 104 mm (4.1 in) bore spacing. This design will replace the former architectures seen in V12 and V8 engines used in most other contemporary Ferraris. The 2005 F430 is the second Ferrari to get a version of this new powerplant.
The Super Sport
The Super Sport version of the Veyron is the fastest road-legal production car in the world, with a top speed of 431 km/h (268 mph). The original version has a top speed of 408.47 km/h (253.81 mph). It was named Car of the Decade (2000–2009) by the BBC television programme Top Gear.
Based on the Bentley Hunaudières concept and built at Bugatti's HQ (Château Saint Jean in Molsheim, Alsace, France), the Veyron's chief designer was Hartmut Warkuss, and the exterior was designed by Jozef Kabaň of Volkswagen, with much of the engineering work being conducted under the guidance of engineering chief Wolfgang Schreiber.
Though commissioned by Volkswagen, this car is only sold through the Bugatti manufacturers and cannot be found at any Volkswagen dealer.
A number of special variants have been produced, including two targa tops. In December 2010, Bugatti began offering prospective buyers the ability to customize exterior and interiors colours by using the Veyron 16.4 Configurator application on the marque's official website.
Langganan:
Postingan (Atom)